Gnutella Forums

Gnutella Forums (https://www.gnutellaforums.com/)
-   Connection Problems (https://www.gnutellaforums.com/connection-problems/)
-   -   DirectConnet Problem Please Help (https://www.gnutellaforums.com/connection-problems/33429-directconnet-problem-please-help.html)

socom2playa February 5th, 2005 07:14 PM

DirectConnet Problem Please Help
 
Im using limewire pro for winxp,I can use the direct connect feature to connect to other people, but they cannot connect to me.I use zone alarm security suite and i think it has something to do with that,im also on a router can anyone help?

Lord of the Rings February 6th, 2005 01:12 AM

After LW's been on for at least 30 mins do this test: Bug Report instructions & sample image Is it True/False?

If it's false then there's a firewall somewhere blocking incoming. Double-check your firewall settings here: http://www.limewire.com/english/content/firewalls.shtml

Can you tell us your Modem & router brand name & model numbers?

It apparently makes it easier to DC if you both have Chat enabled. Tools>Options>Chat

socom2playa February 6th, 2005 10:26 AM

my modem is the speedstream 5200
and router is smc 7004VBR

its weird because i can direct connect to my friend but they cant connect to me ?

Lord of the Rings February 6th, 2005 10:49 AM

Both your modem & router have internal firewalls. So now wonder. You should forward a port for both.

1. Instructions for port forwarding for you modem see: http://www.portforward.com/efficient/5200.htm for instructions on both setting up a static ip & forwarding a port; Port 6346

You must set up a static ip 1st. On the link I gave you'll see a link to static ip for Speedstream. At the bottom of the following page you'll see another link for setting up static ip. You need to follow thru both of those instructions for setting up the static ip. Then do the port forwarding.

2. Your router also needs it. See http://www.portforward.com/smc/7004v...forwarding.htm

3. If you're using a lesser version than 4.4 then you will need to force ip within LW: Force IP instructions & sample image If you are using LW 4.4 tell us.

Get back to us about how things go.

socom2playa February 6th, 2005 11:02 AM

Im using 4.2.6 Pro and going to try to change those settings right now thanks.

socom2playa February 6th, 2005 11:40 AM

the ip address 192.168.254.254 is not working i cannot connect?

Lord of the Rings February 6th, 2005 11:51 AM

Read thru the instuctions again very carefully. Generally if mistakes are made, they are made with the setting up of the static ip. So take it step by step. With some modems, you need to re-boot the modem after you make changes such as forwarding a port. I don't know about your brand though. You'd probably be aware of something like that (or it's in your manual for your modem.)

socom2playa February 6th, 2005 02:32 PM

Thanks for all the help I got it to work, I have 1 other question now, Limewire has me as an ultrapeer and in my connection tab its filled up with others,how does this effect my down/up load speeds ???

Lord of the Rings February 6th, 2005 02:38 PM

I'm not the one to ask about UP. Perhaps you could follow this: http://www.gnutellaforums.com/showth...threadid=27036


All times are GMT -7. The time now is 08:34 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 ©2011, Crawlability, Inc.

Copyright © 2020 Gnutella Forums.
All Rights Reserved.