Connection problem My limewire won't connect either. My internet conncection: Pipex 2mb My router: BT Voyager 2000 My OS: WinXP pro on one pc, Win2k on the other I have opened port 6346 on my router virtual server, both tcp and udp Yet when i go to http://www3.limewire.com:6346 the page doesn't work I have disabled the xp firewall Allowed limewire to act as a server, access the net etc in zonealarm I just don't know what to do... In limewire it just says 'connecting' forever. |
You're not going to connect if you can't find a port to access. The problem might be your router which may need to have a port forwarded (opened) to allow LW access. I know you said you opened a port but, you must have a static ip for port forwarding to work. If you don't then you'll need to repeat the process. A static ip is the 1st thing you must set up. This is not the exact same model but you'll find instructions here: http://www.portforward.com/btvoyager/2100.htm (Use port 6346) Within LW: Manual port forward instructions & sample image & 2 posts after that. After doing this, use the test page again here: http://www3.limewire.com:6346/ |
Thanks for the help but I still can't get it to work 1. I deleted the virtual server ports I had opened 2. I tried to setup a static IP. I followed the instructions on that page, the current DHCP range was 192.168.1.2 to 192.168.1.254 I changed this to 192.168.1.2 to 192.168.1.254 I then set the IP address in control panel TCP/IP properties to 192.168.1.245 and entered the other numbers as required 3. I then again tried to open ports My web control panel is slightly different - The IP address section is under 'Internal Host' instead of asking for an IP address to forward to And then it asks for IP address Here I entered 192.168.1.245 opening both TCP and UDP ports Then saved settings 4. I then in Limewire set it to manual port forward to 6346 Still the test page does not work! What can I have done wrong? Perhaps the IP address should be set to 192.168.1.2 instead? Please help! |
Sorry EDIT I changed the DHCP range to 192.168.1.2 to 192.168.1.240 |
Originally I entered the DNS server address as found when running ipconfig in command this address was 192.168.1.1 Web browsing worked so I assumed this was the correct server Now I've entered the two server numbers as found on the pipex website: http://www.pipex.net/support/wireles...nd/generic.php Web browsing still works but yet Limewire test doesn't work and I can't connect! Please help me! |
All times are GMT -7. The time now is 03:48 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 ©2011, Crawlability, Inc.
Copyright © 2020 Gnutella Forums.
All Rights Reserved.