IncaseGrandpa's mesage doesn't work I'll post back tomorrow

I have a cable hook up, my download speed is 110.2 KB/sec. and my upload speed is 29.9/KB sec. So I adjusted both my dowload speed and upload speed to22.31%. I decided 22.31% would be the right number (29.9 x 0.75 = 22.425%) Will do a search and see what happens next.

must not ben doing it right. This is what I am supposed to do in Adding/Editing Personal Firewall Exception:

Description: I just type in LimeWire

Target: there are three buttons: 1. All applications 2. Operating system components 3. Specified application 3. You should then be able to browse to Limewire.exe
Connection: two buttons 1. Incoming 2. Outgoing (1 rule for each)

Action: 1. Allow 2. Deny 3. Warn 1

Protocol: TCP or UDP or both Both

Port(s): All Ports or Specified Port(s) If using UPnP then all ports. If using portforward, then the port that you typed in the box in Limewire

IP Setting Type: 1. All IP addresses 2. IP address 3. IP address range 4. Subnet mask 5. Broadcast 6. Multicast 1

BTW I'm not entirely sure about this, but give it a shot to see how it works

I am confused about this part: If using UPnP then all ports. If using portforward, then the port that you typed in the box in Limewire. I don't really know what to do, I don't know if I am using UPnp or not.

In Limewire go to

Tools>Options>Advanced>Firewall Config

There you have the choice to

Use UPnP

Manual Port (if you use this then use the same port as the Listening port and you will have to forward that port in your Modem/Router as well)

Do nothing (not a good setting)