loading the java now

installed the new java ....now do i try lw again?

still only one bar.......?

OK Ron

2. What firewalls you have ? disabled or not!!

lynksys wireless g What are the full model no's

__________________
mickjapa108

windows firewall is diabled....only one i see.......wrt54gs lynksys

Try switching to Manual Port forward using port numbers between 45000 To 65000
Both Manual Port forward No, & listening port should be set at the same number
In LimeWire, GO to Tools/Options/Advanced/Firewall Config & use Manual Port forward.

Then Port forward your router,


Port Forwarding for the Linksys WRT54GS
Follow this link it will open on the page you need to PortForward your router.
Use this blue link. & don't forget to create a static IP first, as instructed , & click apply after changing each setting.
PortForward.com - Free Help Setting up Your Router or Firewall

P.S..Configure your XP firewall

Rather than turning off your Windows firewall, configure it to allow LW.

Click on this blue link to configure your XP firewall correctly.
Windows Firewall - LimeWire
Peace.

__________________
mickjapa108

go to "Start"_ "Run". Type cmd then press enter or OK. That will bring you to dos prompt. Type ipconfig. Then press enter. Look for the default "gateway address". That is the ip for your router. Clear your url address and type in that "gateway adress". Nothing but the numbers(no http://, eg.) Now you should be able to see if you are UPuN enabled or not. Call your router manufacter for support if you can't find it looking around. The password for your router is usually admin. No user name is nessecary unless you have changed it yourself.

It might be several things making LW not connect. I worked it it for a whole day until the right combo of suggestions here helped me out. Good luck!