![]() |
Firewall blocks uploads? How can I set up my firewall so people can upload from me. As of now if I leave my firewall on I get no uploads. If I disable it I start seeing uploads begin. Any suggestions. |
Instructions on how to allow LW access thru the most common firewalls is here: http://www.limewire.com/english/content/firewalls.shtml Which firewalls do you have? But if you have a high-speed modem/router wich has an internal NAT firewall then forwarding a port (6346 for LW) might also be necessary (opening a single port.) What brand & model of modem/router do you use? |
I followed those instuctions and chose permit all for javaw.exe a few weeks ago but it didn't seem to fix the problem. I'm using Norton internet security 2004 Motorola modem Cable |
I'm kinda new to lime wire. Do you know what it means if I keep seeing transfer interupted in my upload section. |
If it's frequent then it probably means that you are firewalled. Probably the only people who can access your files are using 'Push requests' to get thru your firewall. I had a similar situation after I moved from dial up to broadband & found my modem-router required port forwarding b/c it was firewalling everybody out! lol There's too many people out there who don't realise they're not properly configured & behind softw or hardware firewalls. We can help you allow LW access if you wish whilst still maintaining firewall protection for everything else. After LW has been on for at least 20 mins do this test: Bug Report instructions & sample image IS it True/False? |
what version of LW are you using might help to upgrade to version 4.4 beta. I have norton internet security 2004 and am using LW 4.3.3. I plan on upgrading soon. Greeting LotR Maybe you could put a link for him |
Configuring Norton Internet Security I'm a bit slow this time of day. Thanks for the elbow Fabion. :D Which model of Motorola are you using? 1st trick is this: Force IP instructions & sample image if you have a modem with a NAT firewall. |
Ok the bug test came up false My modem is sb5100 surfboard cable modem not sure if it has NAT firewall I'm running LM 4.26 I'm going to check those links you sent me right now. thanks |
Do you use USB or Ethernet mode:? |
Ethernet mode Was that false ok? and Do you recommend me forcing my ip. I also checked my norton settings and everything is correct. |
All times are GMT -7. The time now is 01:12 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 ©2011, Crawlability, Inc.
Copyright © 2020 Gnutella Forums.
All Rights Reserved.