Can't see uploads in the monitor area
 

I can't see any uploads when I go to the monitor tab. I get the list of current searches in the top section but nothing appears in the bottom section. Am I stopping uploads somehow? I've checked in tools options etc and everything seems fine there. Is it just that people don't want what I've got?
Cheers.
Stevie

There is a "clear completed" uploads checkbox in the options.

Nope. I'm afraid that didn't work. I should say that every now and then an upload does appear but they are few and far between. Very low transfer rate too.
Thanks for your help though.

You can go to your Library window, select any of your shared folders & look to the columns to the right. Hits will tell you which files were found in other people's searches, & uploads column will tell you which ones were uploaded fully or partially or distrupted.
If you want to increase you sharing, enable partial file sharing. That means people will use some parts of your files whilst downlding from other people.

Thanks again, I have done what you said. The hits column shows plenty of hits but all upload columns are showing 0/0.

Hmm give it time.

I think it may be working ok now. Maybe I was expecting a flood of uploads. I have since found other information on the Forum and realise that this may not be the case.
Thanks again, your suggestions elsewhere have been helpfull too.
Stevie.

Are you getting incoming? Do this test: Bug Report instructions & sample image Is the result True/False? If true then all's fine. If false, then you have some kind of a firewall issue. And the only uploads you'll get are "forced" uploads. LW does have some ability to force its way thru firewalls, but this is not always successful & can result in problems downlding for those persons uploading from you or attempting to.

Aw no. It says false.

Ah that's not good. No wonder you were having problems uploading.

Can you tell us about your set up.
1. What firewalls do you have?
2. Which operating system?
3. Which modem/router brands & model numbers do you have?
4. Who is your ISP?

That was quick.
I have:
Windows Firewall.
Windows xp SP2
Linksys 2.4GHz Model WRK54G
My ISP is ntl.
I should mention that I have made Limewire an 'Exception' for the Firewall.

Windows Xp firewall, double-check your settings: Firewall configuration instructions (click on link)

WRT54G ... eek ... not the most reliable Linksys device on the market. They have many but that's probably their most unreliable & linksys are generally reliable! Check all the WRT54G links under the UPnP section of this link Connection problems? Check here first! (click on link); Check the link called "Linksys WRT54G - Fixed my problem, Followed these steps and it works! for a solution!" as that may be a part of your problem! ;)

BTW it might be worth your bother to install an XP2 patch ... be it a windows one or a 3rd party one or both; see MS & 3rd party patches

I've done the Firewall bit.
I'll go off and try the other stuff now.
Cheers.
Stevie.

And it's a WRK54G not WRT.
Is that any better?

Ah ... I thought it was a typo ... I've never heard of that model. :confused:
I don't have a clue.

But I would recommend googling around to see if there's been problems with that model. The model name is suspicious all the same. To save the UPnP issue ... if it's not already set ... why not manually port forward. At least that guarantees the port is open. Whether the isp keeps that port open is another issue. But it starts with you.

Ill get onto it.

See this The WRK54G is stripped-down version of the LinksysWrt54g wireless router. Also http://www.linksysinfo.org/modules.p...article&sid=36 Perhaps the firmware update quoted will be good for it. It sounds like you should basically treat it as the one I suggested earlier. Try it in UPnP mode. Make sure UPnP is enabled in your WRK54G. If that doesn't help, then look at the previous suggestion in my previous post.

Yahoo I cracked it. Went to this place for a step by step guide. Very handy. http://www.portforward.com/
Thanks again for your help.
Ah it's good to get going again.
Stevie.

Yep manually port forwarding is generally a lot more guaranteed a port will be open. As compared to using UPnP which can be unreliable on some models. Good to hear you solved your problem.