Upload trouble, and router config input
 

The trouble is:
Lots of transfer interupted.

The question with my linksys router is:
I have an option to port range forward(that allows me to set a range of ports and an option for both tcp and udp.
And an option for uPnP forward that allows after set only one or the other.
So how do I set either?

I'd first try to set it up under UPnP mode. Therefore you have to enable this function as well in LW (Go LW>Tools>Options>Advanced>Fireall Config.).

For portforward you need to set up a static IP for your router. Read here on how to do so:
http://www.portforward.com/

TCP/UDP should have the same numbers....
:Smilywais:

Ok, then in uPnP mode, as mentioned, should i just pick tcp? as there is no option for both?

If there is no option for "auto detect", well, I'd say give it a shot....then you'll see what happens.....
:Smilywais:

UPnp mode is both, as upnp selects the closest available ports it can find for connection & listening. But, you can at least change listening port. Go to LW's menu bar, Tools>Options>Advanced>Firewalls & change listening port to say 64049. Then restart LW.

After I saw FOTH's post before me I had a memory collapse as to what i was going to edit in. :D

My memory fails me but most traffic goes one or the other tcp or udp. One is mostly for information & the other for file data.

Ok, I want to say my fire wall block is gone now, but, im not sure why, but my port selection is set to 14481. something i read here some time ago. Is this a problem?
edit
i will set the port you say, but was just wondering where i got the port i said

Not at all, as long as the firewall detection has disappeared as well as the small brick wall in front of the globe, you can use this port number.
:Smilywais:

wall is gone, and will give input later as to my upload progress, ty