Gnutella Forums

Gnutella Forums (https://www.gnutellaforums.com/)
-   General Gnutella Development Discussion (https://www.gnutellaforums.com/general-gnutella-development-discussion/)
-   -   New UDP-HostCache Specifications (quote from the_GDF) (https://www.gnutellaforums.com/general-gnutella-development-discussion/29521-new-udp-hostcache-specifications-quote-the_gdf.html)

arne_bab October 28th, 2004 07:47 PM

New UDP-HostCache Specifications (quote from the_GDF)
 
Date: Mon, 25 Oct 2004 14:20:10 -0400
From: Sam Berlin <sberlin@limepeer.com>
Subject: UDP Host Caches (UHCs)

Hi Folks,

What follows is an outline of how your client can make use of UDP Host
Caches (UHCs). UHCs are designed to work both as a distributed
bootstrapping system and a smaller GWebCache-like system, utilizing
both volunteers and randomly network-elected nodes. The caches work by
using Gnutella pings & pongs with additional GGEP fields.

There are four main GGEP fields that are essential for UHCs (although
not all are strictly for use by UHCs).

1) UDPHC [UDP Host Cache]. This GGEP extension is placed in a Pong by
any client wishing to describe itself as a UHC. When a servent reads a
pong that has this GGEP field, then it should remember the host as a
UHC and use it for bootstrapping in future scenarios where it may need
to repopulate its internal list of network hosts. A servent should
NEVER contact a UHC via TCP. The UDPHC can contain an optional data
value, which if it exists is interpreted to be the DNS name of this
UHC. If this value exists, clients should remember the UHC via the DNS
name instead of the IP contained in the pong. This allows UHCs to be
reachable via DNS and thus change the ultimate IP it resolves to at any
time. The port to contact the UHC is the same port as the pong's port.
For example, a Pong from host 1.2.3.4, port 9999 containing the GGEP
key UDPHC without any data will be remembered as a UHC at 1.2.3.4:9999.
A pong from host 1.2.3.4, port 9999 containing the GGEP key UDPHC with
the data of "uhc.udp-host-cache.com" will be remembered as a UHC at
uhc.udp-host-cache.com:9999.

2) IPP [Ip Port]. This GGEP extension is placed in a Pong and contains
a list of IP/Ports. The format is the same as other lists of IpPorts,
the first four bytes representing the IP address and the last two
representing the port. The length of the number of bytes of IPP must
be divisible by 6. Note that any client can send IPP packed IpPorts in
Pongs, which is particularly useful on initial entry into Gnutella. It
is the Pong equivalent of "X-Try-Ultrapeers". IPP should only be sent
in response to a Ping which contains the "SCP" field.

3) SCP [Supports Cached Pongs]. This GGEP extension is placed in a
Ping. Placing this in the ping indicates support for "cached pongs" --
the IPP field of Pongs. No data is required as a value for SCP,
although data can be used to optimize how the ponger responds.
Currently, it is possible to describe whether or not you would prefer
hosts with free leaf slots of hosts with free ultrapeer slots. If data
exists, the mask 0x1 will indicate which preference. If the data[0] &
0x1 == 0x1, the host prefers free ultrapeer slots. If the data[0] &
0x1 == 0x0, the host prefers free leaf slots. This leaves the other 7
bits of the first byte open for future use, and an endless supply of
more bytes.

4) PHC [Packed Host Caches]. This GGEP extension is placed in a Pong
and contains a gzipped \n delimited list of alternate UHCs. The list
is a gzipped string (and not bunch of IpPorts) so that it can transmit
information about UHCs who are resolvable via DNS. It is possible to
add optional key/value pairs to host caches, should the future ever
need to describe properties about an individual cache. This is done by
appending an ampersand and then key=value after the port. For example,
a single cache can be described as
"address.com:port&key=value&key2=value2". Multiple caches are simply
appended with a \n between them. Note that the value of PHC is gzipped
-- the entire GGEP block is not compressed.

Support for these four GGEP extensions to Pings & Pongs and remembering
& utilizing UHCs are all that is needed for a client to ultimately use
UHCs. The caches themselves can be built into servents (and flowed via
normal ping/pong methods), or can be built separately and distribute
themselves to other UHCs in an as-yet-uncreated method (probably using
the PHC fields of Pongs). It is possible for clients to recommend that
very long uptime users whose IP address does not change to create
dyndns accounts, to be used as bootstrap hosts for brand new clients.
Long uptime clients (likely leaves) can also be promoted to distributed
UHCs, and spread their whereabouts around so that clients who at one
point were on the network but now have a stale cached list of hosts can
contact them.

Thanks,
Sam



__________________________________________________ ______________________

Message: 12
Date: Mon, 25 Oct 2004 14:40:10 -0400
From: "Greg Bildson" <gbildson@limepeer.com>
Subject: RE: UDP Host Caches (UHCs)

One MAJORLY IMPORTANT thing to note before consulting a UHC. You must
support the recording and use of long uptime host addresses before
consulting a UHC. UHCs are for use by new clients first connections to the
network and by clients who's list of long uptime hosts has gotten out of
date. You know your list of hosts has gotten out of date by attempting to
use it to connect first.

Please do not make the same mistake as occurred with GWebcaches by making
use of them exclusively before trying other decentralized means. If you
don't heed this warning, you will be considered a defective client and
appropriate action will be taken to minimize the damage that you might cause
the network.


All times are GMT -7. The time now is 03:56 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 ©2011, Crawlability, Inc.

Copyright 2020 Gnutella Forums.
All Rights Reserved.