Gnutella Forums

Gnutella Forums (https://www.gnutellaforums.com/)
-   Getting Started Using LimeWire + WireShare (https://www.gnutellaforums.com/getting-started-using-limewire-wireshare/)
-   -   Firewall (https://www.gnutellaforums.com/getting-started-using-limewire-wireshare/70876-firewall.html)

Living Stone May 31st, 2007 07:54 AM

Firewall
 
Hi
Have my firewall off, but icon at bottom lhs of LW shows it is on.


1. OS version? MSXP
2. What firewalls you have? MSXP
3. How much ram? 80M
4. Hard Disk space available?30G
5. Connection type? (eg: dialup, broadband, cable, etc.) ADSL
6. Modem & router brand name & model numbers? PREMIUM COMBO ADSL ROUTER 2+
7. Where are you trying to connect from (house, appartment complex, school, student accomodation, work, etc.)? HOUSE
8. What version of LimeWire (LW) & Java do you have? [COLOR=blue****** VERSION[/COLOR]

9. Who is your ISP provider (Internet Service Provider)? AFRIHOST
10. Do this simple test for us. Using your browser go here:
http://www3.limewire.com:6346/ The page should say 'Your test worked!'. What happens when you go there? DID NOT CONNECT
11. Are you sharing the connection with other computers or p2p sharing programs? If yes, please give details of set up. NO
12. Is this a your 1st try at LW or is this a new problem with an experienced user. 1ST TRY
13. Do you see a brick wall in front of the blue world icon at the bottom of LW's interface? YES, AND MY FIREWALL ON MSXP IS SWITCHED OFF
http://www.gnutellaforums.com/attach...1&d=1158099342
14. For those using a modem/router, how is your modem/router set up...are you port forwarding or is UPnP enabled? N/A

IM A BIT HESITANT HAVING MY FIREWALL DOWN TOO.. CAN YOU RECOMMEND A FREE A.V.?

BEST REGARDS
LIVING STONE
:wai:

ukbobboy01 May 31st, 2007 10:34 AM

LS

There is a built in NAT firewall in your ADSL Router, to get it to work with LW you will either have to activate UPnP, but because the implementation of UPnP between software and hardware vendors is patchy, it may not work. Alternatively, the option which most users prefer is port forwarding.

Now, to get the correct instructions for your ADSL Router you must get back to this forum the make and model number, then you will be directed to the correct instructions.


UK Bob

Living Stone June 1st, 2007 01:27 AM

Hi UK Bob
Thanks for your time. The router is a Telkom South Africa product, ICASA approved. These are the details I can find:
Serial No:68180102000028C7
Part No: A211-0307-01
WPA key:00:02:96:12:3A:00
Telkom Material No:6002635
EAN:6009503308037
I am now off to check the other Firewall threads, hope we can get this flying. Best regards.

Living Stone June 1st, 2007 01:55 AM

Hi again UK Bob
I contacted the Marconi suppliers of my router and went through the procedures to drop the firewall on the modem. Would you like to know the procedures?
I now have a strong connection to LW...
Thanks again.

ukbobboy01 June 1st, 2007 05:21 AM

Hi LS

Your new found knowledge will be helpful to other forum members with the same modem router, so yes please let us know the procedure for dropping the firewall.


UK Bob

mineman July 4th, 2007 06:28 AM

Premium Combo
 
Can some one look on their modem and let me know the voltage on the transformer as I have just moved and it has gone astray , Im in Kenya so no visiting Telkom for me ??

Dave


All times are GMT -7. The time now is 11:11 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 ©2011, Crawlability, Inc.

Copyright © 2020 Gnutella Forums.
All Rights Reserved.