Gnutella Forums  

Go Back   Gnutella Forums > Current Gnutella Client Forums > LimeWire+WireShare (Cross-platform) > Technical Support > Connection Problems
Register FAQ The Twelve Commandments Members List Calendar Arcade Find the Best VPN Today's Posts

Connection Problems Problems getting the LimeWire or WireShare program connecting to the Gnutella network. (not about connecting to files, that is a Download/Upload Problems section issue.) Please supply system details as described in the forum rules.
Start here Suggestions to help you get connected, * try here first *, then see below (click on 'this' blue link)

Did you FORGET something BEFORE you posted? If you post in this section you MUST provide these details: System details - help us to help you (click on 'this' blue link), else do not be surprised if your posting is ignored :)


Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old March 14th, 2008
Novicius
 
Join Date: March 10th, 2008
Posts: 4
bec4575 is flying high
Smile direct connect

hi can anyone help please?
i would like to use the direct connect feature, it asks for an ip address, myself nor my friend i want to connect to have no idea where to find this.
can anyone let me know how to get it?
many thanks
Reply With Quote
  #2 (permalink)  
Old March 14th, 2008
Novicius
 
Join Date: March 10th, 2008
Posts: 4
bec4575 is flying high
Default

i think i may be getting nearer lol
but when i click on the direct connect it says your computer is behind a fire wall or your router can not receive direct connections.
can anyone tell me how to check fire wall or if its because of the router how can i sort this out to allow me to direct connect.
many thanks
Reply With Quote
  #3 (permalink)  
Old March 15th, 2008
Remoc's Avatar
TexAz
 
Join Date: July 4th, 2006
Location: Sweating in Az.
Posts: 2,906
Remoc has a spectacular aura about
Default

Could be either or. What Firewall and Security Program are you using??Need to give LW Full access.

What Make and Model # is your Router. May need to Port Forward and set up a Static IP Address. Model # is usually on the Bottom of the Router. Supply that info and I can check it out for you.
__________________
I Don't Suffer From Insanity, I Enjoy Every Minute of it





Reply With Quote
  #4 (permalink)  
Old July 5th, 2008
techno-slug
 
Join Date: June 11th, 2008
Posts: 13
vi_curious is flying high
Default

Remoc~
Slightly OT (but since original poster never responded I feel very little guilt in the threadjack), I installed AVG yesterday and have been unable to locate the spot where I tell it to allow Limewire direct connects. It is allowing random connects. It did allow DCs until I installed AVG

1. OS version? Windows XP
2. What firewalls you have? AVG v8.0
3. How much ram? sorry, I don't know how to locate that information
4. Hard Disk space available? plenty
5. Connection type? cable
6. Modem & router brand name & model numbers? linksys wrt54G
7. Where are you trying to connect from? home
8. What version of LimeWire & Java do you have? 4.18.2 and 1.6.0_05 respectively
9. Who is your ISP? qwest
10. Do this simple test for us. It worked
11. Are you sharing the connection with other computers or p2p sharing programs? no
12. Is this a your 1st try at LW or is this a new problem with an experienced user. I'm not experienced but I've used it for a while
13. Do you see a brick wall ? yes, but random connect are working, just not DCs
14. For those using a modem/router, how is your modem/router set up...are you port forwarding or is UPnP enabled?
15. What security programs are you using (antivirus etc)? AVG 8.0 as of yesterday, which is when the problem started
16. What country are you living in? USA

Do you have any suggestions? Please keep in mind that I'm a techno-slug, so simpler jargon is best for me. Thanks in advace for your time, and btw, I'm sweating in AZ too :|

Last edited by vi_curious; July 5th, 2008 at 08:57 AM.
Reply With Quote
  #5 (permalink)  
Old July 5th, 2008
techno-slug
 
Join Date: June 11th, 2008
Posts: 13
vi_curious is flying high
Default

updated with additional information.
Reply With Quote
  #6 (permalink)  
Old July 5th, 2008
Remoc's Avatar
TexAz
 
Join Date: July 4th, 2006
Location: Sweating in Az.
Posts: 2,906
Remoc has a spectacular aura about
Default

Hey VI... As Far as I can see AVG v8 doesn't have a Firewall.
AVG Antivirus 8 Internet security and firewall reviews - CNET Reviews.

You might try Port Forwarding your Linksys Router as they are renowned for problems.

Port Forwarding for the Linksys WRT54G.

Since AVG has no Firewall, you might check your Windows Firewall to make sure LW has Full Access.

After further review, You might Reconsider Using AVG v8. See Below Link

Say it ain’t so AVG, say it ain’t so: AVG LinkScanner = Badware? | Zero Day | ZDNet.com
__________________
I Don't Suffer From Insanity, I Enjoy Every Minute of it






Last edited by Remoc; July 5th, 2008 at 05:32 PM.
Reply With Quote
  #7 (permalink)  
Old July 5th, 2008
techno-slug
 
Join Date: June 11th, 2008
Posts: 13
vi_curious is flying high
Default

Hmmm, then I wonder why my DC vanished when I installed the AVG? I'll do the port forward thing, thanks for the link. The explanation looks simple enough for even me!

Now about that whole malware thing ... i don't know what it means!!!
Reply With Quote
  #8 (permalink)  
Old July 5th, 2008
techno-slug
 
Join Date: June 11th, 2008
Posts: 13
vi_curious is flying high
Default

Well, I got as far as 'call my ISP to get the Name Server ip address', but Qwest tells me they can't do that because they don't offer static ip addresses. I, being the technoslug that I am and not understanding what she was telling me, am unable to argue my position. But I guess it's not that big of a deal. My random connects work, and if I need to forward specific files I can always load to a flash drive... good thing most of my people are local

Thanks again for your help, I appreciate your time.
Reply With Quote
  #9 (permalink)  
Old July 5th, 2008
Remoc's Avatar
TexAz
 
Join Date: July 4th, 2006
Location: Sweating in Az.
Posts: 2,906
Remoc has a spectacular aura about
Default

When you click the Port Forward Link I gave You, Look for setting up the Static IP Address Guid. This is the First thing You Need to Follow.
__________________
I Don't Suffer From Insanity, I Enjoy Every Minute of it





Reply With Quote
  #10 (permalink)  
Old July 6th, 2008
techno-slug
 
Join Date: June 11th, 2008
Posts: 13
vi_curious is flying high
Default

Thanks Remoc, but I'm unable to proceed with those instructions. My random loads work so that's enough for me.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 11:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 ©2011, Crawlability, Inc.

Copyright © 2020 Gnutella Forums.
All Rights Reserved.