I went to the help in my limewire and clicked on Using Limewire and then went to Connection Problem and Firewall Problems. You have to go to your Windows Security Center in your Controll Panel and remove Limewire and then re-add it. Here are the instructions.

(If the Connections tab is not visible, you can reveal it by going to View > Show/Hide > Connections)

• LimeWire tries to connect to hosts on the Gnutella network, but it cannot achieve a connection with any of them.
• The connection quality indicator in the bottom-left corner of the LimeWire window remains at one bar indefinitely.
• The firewall status bar icon indicates that your computer is behind a firewall (brick wall in front of a globe). Under most circumstances, LimeWire will connect to the Gnutella network even if your computer is behind a firewall. In some cases, a port will need to be manually opened before LimeWire achieves a connection.

In some cases, LimeWire will not start at all, and you receive the following error message (follow the link or scroll down for more information):
LimeWire was unable to initialize and start. This is usually due to a firewall program blocking LimeWire's access to the internet or loopback connections on the local machine. Please allow LimeWire access to the internet and restart LimeWire. Solution

Third-Party Security Programs

Many third-party security programs block LimeWire from connecting either by restricting access to the port that LimeWire uses to connect to the Gnutella network (i.e. - a firewall), the program itself, or a combination of the two. These programs may have been pre-installed on your computer when you first purchased it. Check the Windows system tray (usually located in the bottom-right corner of the screen, next to the time), and locate the icon that is associated with the security program that you are using. Right-click the icon to enter the settings.
Programs Known To Potentially Block LimeWire


Sample right-click menu from the system tray icon



Norton Internet Security
Norton Personal Firewall
McAfee Firewall
Kerio Personal Firewall
SyGate Personal Firewall
ZoneAlarm Firewall
AOL Firewall
SBC Yahoo! Firewall
SBC Yahoo! Parental Controls
eTrust EZ Armor
Panda Internet Security
Trend Micro PC-cillin
F-Secure Internet Security
Microsoft Windows Live OneCare


Adding An Exception For The LimeWire Program

1. Open the settings of your security program (usually by right-clicking the system tray icon)
2. Locate a section for adding exceptions for specific programs
3. Add LimeWire as an exception (C:\Program Files\LimeWire\LimeWire.exe by default on Windows systems)

Adding An Exception For The Gnutella Port

1. Within LimeWire, go to: Tools > Options > Advanced > Firewall Config, and make a note of the listening port located in the box next to "Listen on Port"
2. Open the settings of your security program (usually by right-clicking the system tray icon)
3. Locate a section for adding exceptions for specific ports
4. Add the port specified in LimeWire's settings as an exception for both UDP and TCP, incoming and outgoing (also known as opening the port)

Windows Firewall

LimeWire automatically adds itself to the list of exceptions in the Windows firewall (assuming that the firewall is enabled and an exception does not already exist) when you launch the program. The Windows firewall should not need to be configured. If for some reason, you need to open up a port in the Windows firewall manually or add an exception for LimeWire, or you just want to check and make sure that LimeWire has been added, you may visit the Windows XP Firewall Instructions page.
OS X Firewall

By default, the OS X Tiger firewall is turned off and should not need to be configured. If for some reason, you need to open up a port in the OS X firewall manually, here are instructions for doing that:

1. Go to LimeWire > Preferences > Advanced > Firewall Config, and make a note of the listening port located in the box next to "Listen on Port"
2. Go to System Preferences > Sharing > Firewall
   • On older versions of OS X, go to System Preferences > Internet & Network > Sharing > Firewall tab
3. Click the "New" button and select "Other" next to "Port Name"
4. Enter the TCP and UDP port numbers as specified in LimeWire's settings

Modem and Router Firewalls

Some modems and routers contain firewalls. A router is a device that allows multiple computers to connect to the internet through one connection while at the same time connecting each computer to an internal network. If you are using an external modem to connect to the internet, it would be plugged into the router, and the router would be plugged into the computer or transmitted wirelessly. Most routers are UPnP-enabled and should not need to be configured. If you are using an older router that does not support UPnP, you may need to set up manual port forwarding, or if the router uses a firewall that is blocking the connection, you may need to open a port for LimeWire.
Within the LimeWire options (accessible from Tools > Options on most systems), go to Advanced > Firewall Config, and locate the listening port. Open this port in your modem's or router's firewall for both incoming and outgoing connections, UDP and TCP.
Initialization Error

This section applies to those who receive the following error message when LimeWire launches:
LimeWire was unable to initialize and start. This is usually due to a firewall program blocking LimeWire's access to the internet or loopback connections on the local machine. Please allow LimeWire access to the internet and restart LimeWire. When LimeWire loads, it checks to see if LimeWire can talk to itself (ie - make loopback connections). If it can't, then a security program is likely blocking LimeWire. Check any security programs installed on your computer to make sure that LimeWire is listed as an exception. Norton's Internet Worm Protection feature has been known to cause LimeWire to produce this error.
Still Can't Connect?

• If you have never been able to connect, contact your Internet Service Provider (ISP) to find out if they block peer-to-peer connections. Some ISPs block or limit peer-to-peer traffic in order to reduce the burden on their servers. Also ask if you are connecting through a proxy. ISPs that provide high-speed-like connections through normal dial-up connections use proxies, and many satellite connections also use proxies. LimeWire will need to be configured to work with your proxy by going to Advanced > Proxy within the LimeWire options. If your ISP sent you a modem, ask if it is equipped with a firewall.
• If you have been able to connect in the past, the existing exceptions in your security program(s) may have stopped working. Remove all exceptions for LimeWire in all of your security programs, and then re-add them.
• If you are trying to connect from school or work, then you are probably connecting through a Local Area Network (LAN), and you may need to contact the system administrator to make sure that a network firewall is not preventing LimeWire from connecting to the Gnutella network.

Related Topics

• Why can't I establish a good connection immediately?
• Why do I sometimes lose my connection to the Gnutella network?
• How come I only connect to a few host? I used to connect to many more hosts!

Retrieved from "http://wiki.limewire.org/index.php?title=User_Cant_Connect"
Category: Support

I have been a limewire user for a while now and I have just recently not been able to download anything. I have uninstalled and reinstalled many times. I even just upgraded to Limewire Pro and nothing is different. Feel like I paid for nothing Someone please help.

Thanks
Lisa

HELP!!!!!!!!!!!!
[quote=nmshooper15;313296]I HAVE THE SAME PROBLEMS SO I WILL FILL IT OUT

OK give some system details.

1. OS version? Windows Vista account
2. What firewalls you have? Windows Firewall
3. How much ram? 2038 MB
4. Hard Disk space available? 220
5. Connection type? (eg: dialup, broadband, cable, etc.) Wireless Connections
6. Modem & router brand name & model numbers? Linkysys WRT350N
7. Where are you trying to connect from (house, appartment complex, school, student accomodation, work, etc.)? House
8. What version of LimeWire (LW) & Java do you have? Limeware 4.12.11 Java 1.6.0_02
9. Who is your ISP (Internet Service Provider)? Westwell
10. Do this simple test for us. Using your browser go here: Test didn't work
11. Are you sharing the connection with other computers or p2p sharing programs? Yes
12. Is this a your 1st try at LW or is this a new problem with an experienced user. I have had limeware before with linksys and it worked just fine
13. Do you see a brick wall in front of the blue world icon at the bottom of LW's interface? Yes but i have done everything and it stills show plus I have had that on there and it worked fine before
14. For those using a modem/router, how is your modem/router set up...are you port forwarding or is UPnP enabled? UPnP
15. What security programs are you using (antivirus etc)? AVG and Windows Defender
16. What country are you living in? USA

This was really weird the next day in the afternoon everything worked great, I didn't even do anything but wait !!!! Anyhow this forum is great...

You didn't supply us with any details of set up about your system. So we can only guess. It may well be your ISP shaping or blocking p2p programs or specifically LW during certain hours of the day. That's just a possibility. Another possibility is you were trying to connect through "dud" ultrapeers.
(a) If LW Will Not Connect, __ (b) Problems with the search, __ (c) Hostiles List