The trouble is:
Lots of transfer interupted.

The question with my linksys router is:
I have an option to port range forward(that allows me to set a range of ports and an option for both tcp and udp.
And an option for uPnP forward that allows after set only one or the other.
So how do I set either?

I'd first try to set it up under UPnP mode. Therefore you have to enable this function as well in LW (Go LW>Tools>Options>Advanced>Fireall Config.).

For portforward you need to set up a static IP for your router. Read here on how to do so:
http://www.portforward.com/

TCP/UDP should have the same numbers....

__________________

"Never Argue With An Idiot. They Will Drag You Down To Their Level, Then Beat You With Experience"

Ok, then in uPnP mode, as mentioned, should i just pick tcp? as there is no option for both?

If there is no option for "auto detect", well, I'd say give it a shot....then you'll see what happens.....

__________________

"Never Argue With An Idiot. They Will Drag You Down To Their Level, Then Beat You With Experience"

UPnp mode is both, as upnp selects the closest available ports it can find for connection & listening. But, you can at least change listening port. Go to LW's menu bar, Tools>Options>Advanced>Firewalls & change listening port to say 64049. Then restart LW.

After I saw FOTH's post before me I had a memory collapse as to what i was going to edit in.

My memory fails me but most traffic goes one or the other tcp or udp. One is mostly for information & the other for file data.

Ok, I want to say my fire wall block is gone now, but, im not sure why, but my port selection is set to 14481. something i read here some time ago. Is this a problem?
edit
i will set the port you say, but was just wondering where i got the port i said

Not at all, as long as the firewall detection has disappeared as well as the small brick wall in front of the globe, you can use this port number.

__________________

"Never Argue With An Idiot. They Will Drag You Down To Their Level, Then Beat You With Experience"

wall is gone, and will give input later as to my upload progress, ty