If my earlier suggestion is unable to resolve
the no-connection problem, please try out
the following steps:

(1)Open Limewire program.
(2)Click "Tools" (on the Limewire program)
(3)Click "Options"
(4)Click "Advanced"
(5)Click "Firewall configuration"
(6)Click "Manual Port Forward" (i.e. dot it).
(7)Click "Use UPnP (Recommended)" (i.e. dot it)
(8)Click "Apply"
(9)This message will be displayed:"One or more
options will take effect the next time Limewire is
restored."
(10)Click "OK"
(11)Click "File Association"
(12)Uncheck "torrents" files (i.e. remove the "tick")
(13)Uncheck "magnet:" links
(14)Recheck "torrents" files (i.e. put back the "tick")
(15)Recheck "magnet:" links
(16)Click "Ask me what to do when an association is missing (i.e.
put a dot within the circle)
(17)Click "Always take the selected associations." (i.e. put a
dot within the circle)
(18)Click "Apply"
(19)This message will be displayed: "One or more
options will take effect the next time Limewire is
restored."
(17)Click "OK"
(18)Click "Performance"
(19)Check "Disable Ultrapeer capabilities" (insert a "tick" there)
(20)Uncheck "Disable Ultapeer capabilties" (remove the "tick")
(21)Click "Apply"
(22)This message will be displayed:" One or more
options will take effect the nex time Limewire is
restored."
(23)Click "OK"
(24)If the brick doesn't disappear by now, turn off &
restart your computer.
(25)Open Limewire program & wait a minute or two for the brick
to disappear.
(Sometimes Limewire will display some instructions for you to
adjust the Limewire program. Just click "Next" till "Finish")
(26)If the brick doesn't disappear, CLICK "Options" >""Advanced" >
"Firewall configuration" & copy down the "Listen on Port" number
(this number often changes).
(27)Next, CLICK "Start" (Windows) > "Control Panel" >"Windows
Firewall"(Classic view) > "Exceptions" > "Add Port"
(28)Type Name as "C:\ProgramFiles\LimeWire\LimeWire.exe"
(29)Type in Port Number & select "TCP" (put a dot within the
circle). Click "OK".
(30)Click "Add Port"
(31)Type Name as:"C:\ProgramFiles\ LimeWire\LimeWire.exe"
(32)Type in Port Number & select "UDP". Click "OK"
(33) Click "OK" to close "Windows Firewall"
(34)If the brick doesn't disappear, then go through Steps
(1) to (24) again.

Very often my Limewire Program isn't able to connect
to the Gnutella network. I'm using the above method
as well as the other method in my first post to sort
out the problem & most of the time the brick wall will
disappear & the bars will turn green.
If you're unable to connect to the network after you
tried the 2 methods that I've suggested, perhaps one or
more files in the Limewire program you had downloaded
are corrupted. Search & remove all Limewire files &
download the program again. If the problem still
persists, perhaps the faulty Limewire program that you
had downloaded earlier is still hidden somewhere within
your computer or has replaced your newer Limewire download.
I don't know the steps to search for the faulty Limewire
program (i.e. in case it's still hidden within a hidden file)
& remove it and perhaps a reader who knows
how to do it will share his or her expertise.

If any reader knows of another method to resolve
the problem, please post your solution. Thanks!

I have tried steps 1-33. I have uninstalled and reinstalled several times. It still states that I have no connection. There is still the brick and the one red bar. What now?

Yeah i deleted the preference folder and i think i deleted the folder in the old location. I just deleted the folder with Limewire on it. And wen i reopened it, it went through the install wizard again. This is wrecking my head!!

In LW file > disconnect. Wait 10 minutes, then file > connect.

If it's still stuck, try replacing the gnutella.net file (see the threads in post #4, the bottom thread has very basic instructions point 7 onwards). That's worked for quite a few people.
If that doesn't help, give us your details.
System details - help us to help you -> Provide these details when you post!!!(click on link)

1. OS version? Windows XP SP2 Home edition
2. What firewalls you have? Yes Windows Firewall, but Limewire is an exception
3. How much ram? 512 MB
4. Hard Disk space available? 56.09 GB
5. Connection type? (eg: dialup, broadband, cable, etc.) Broadband
6. Modem & router brand name & model numbers? Dont know
7. Where are you trying to connect from (house, appartment complex, school, student accomodation, work, etc.)? House
8. What version of LimeWire (LW) & Java do you have? (Go to LW's menu Help>About LW...) Will show both LW & Java version. Limewire 4.14.10 Java 1.6.0_03
9. Who is your ISP (Internet Service Provider)? Irish Broadband
10. Do this simple test for us. Using your browser go here: http://www3.limewire.com:6346/ The page should say 'Your test worked!'. What happens when you go there? Your Test Worked
11. Are you sharing the connection with other computers or p2p sharing programs? If yes, please give details of set up. Only Limewire
12. Is this a your 1st try at LW or is this a new problem with an experienced user. New Problem
13. Do you see a brick wall in front of the blue world icon at the bottom of LW's interface? _ click here to see Sample image Yes
14. For those using a modem/router, how is your modem/router set up...are you port forwarding or is UPnP enabled? Dont know
15. What security programs are you using (antivirus etc)? Some people might not be aware that their security suite includes a firewall AVG Antivirus Free Edition
16. What country are you living in? Sometimes there are ISPs with the same name in more than one country (eg Clearwire in the USA & also in Ireland). Ireland

Did you replace the gnutella.net file (within LW's preferences folder named LimeWire)?

Do you use a modem or router? Look for a box with lights on it which connects to your computer & lets you connect to the net. If you're using a wireless connection, the modem/router might be in another room.

In LW go tools > options > advanced > firewall config. Change LW's listening port to 64049 > apply > ok. You can also try other ports in the range of 49152 - 65535.

If you can find your model in the list here, try port forwarding.
PortForward.com - Free Help Setting up Your Router or Firewall
Click on your modem/router model & then choose LimeWire from the list of programs. Then you'll see step-by-step instructions for port forwarding.

If setting up a static IP is part of the instructions, don't miss that step. LW's listening port, port in the 'manual port forward' box & port forwarded within the router setup should all be the same number

Hi philip251912,thank-you so much for the fix.Going on 3rd day of successful lw connection ( i use xp home edition) sincerely,Kristine.