Your Linkskys has a Nat Firewall as you are aware of and will need to Port Forwarded...These are the instructions for the WRT54Gv5, hopefully they are similar if not the same as the v6....

Port Forwarding for the Linksys WRT54Gv5

__________________


If you dont live for something...
You die for nothing...

works now thanks!

ok I spoke too soon. For some reason it worked that one time and now it will not connect again! The port I chose was 33990. ON the link you gave me it has a step where I enter the static IP of where I want to forward to, and basically you just have to put the 1 in the box cause all linksys are 192.168.1.1


Well, there was something that happened when I setup my router and so I have to use 192.168.2.1

This mean I cannot enter anything into the boxes when they ask cause they use.1.1, and I use .2.1!!!

Also, I went to my router setup page and in addition to putting 33990n in the port forward boxes and selecting "both", I went to the port trigger tab and put 33990 in every box there as well. I also enabled dmz, and still I have the damn firewall symbol!!!!!!!!!!!!!!

I'm not sure I am following, did you not create a static IP number ??
Did you select the box in the instructions that say "Find Staic IP"

PortForward.com - Free Help Setting up Your Router or Firewall

__________________


If you dont live for something...
You die for nothing...

I'm not sure I understand this static IP thing. I don't know if the other computer has a static IP.

When I did the ipconfig /all, the DNS server was 192.168.1.1

While the DHCP, and default gateway were 192.168.2.1

Yep, so what you do is fill in the boxes with those numbers, where the instructions tell you to (it's best to write down all the info from your ipconfig screen) once they are all filled in you click on the "find static IP" and a IP number will appear, then you go back to the port forwarding instructions page and enter that number into the box it tells you to and you go from there...

__________________


If you dont live for something...
You die for nothing...

ok, I'm trying to do this static IP thing. In my router setup page, there are Static DNS 1, and Static DNS 2, both have 192.168.1.1 in them.

There is also a static DNS 3 and WN, but nothing is in those boxes

When I type the ipconfig/all, my default gateway is: 192.168.2.1, and subnet mask is 255.255.255.0

I will continue on with the tutoiral and see what happens