Gnutella Forums

Gnutella Forums (https://www.gnutellaforums.com/)
-   Download/Upload Problems (https://www.gnutellaforums.com/download-upload-problems/)
-   -   Maximizing upload/download Success LimeWire (https://www.gnutellaforums.com/download-upload-problems/17321-maximizing-upload-download-success-limewire.html)

birdy February 9th, 2008 04:31 PM

Normally you'd progress from that page to a firewall setup page.

If you're missing the 'back', 'next' & 'cancel' buttons from the setup page, check out the thread below:)
http://www.gnutellaforums.com/230100-post7.html

belfastbill February 10th, 2008 12:02 PM

Quote:

Originally Posted by LeeWare (Post 60217)
I posted this thread in the open discussion but decided I should also post it here as it could be useful for some people.

Maximizing upload/download Success LimeWire

Objective:

I'm starting this thread to address two common problems which seem to appear over and over again in the forums.

General description of the problem:

1. Problems downloading content
2. Low upload count


With the influx of users to peer to peer networking and specifically New LimeWire users many of which I assume are also new broadband users there are several issues that arise out of a general lack of knowledge in what is required to participate in this type of networking model with moderate success. There are a few things that become self evident if you've spent any time on the Gnutella network and these forums.

1. Posts to the forum that don't adequately describe the problem. (for example, I can't connect.) -

The status of these problems would have a higher probability of receiving useful feedback if users provided some basic information such as; machine, operating system, connection speed, location of connection I.E. School work or home.

For example: I'm new to Limewire- I just downloaded limewire and installed it on a Windows 98 Machine with a T1 connection to the network from school. I don't have a firewall installed on my computer and don't know if there is one here but I cannot seem to connect using limewire. My other application i'e web browsers and email work fine. Can anybody tell me what's wrong?


2. Posts to the forum for issues that have been addressed in the FAQs suggests that people are not reading them.

3. Posts to forum for issues that have been addressed in other threads this also suggests that people are not even reading the threads before they post.
4. Post to areas of the forum that are not necessarily dedicated to the issues being raised. Connection Problems in the Open Discussion Forum. MAC issues in the Open Forum.

5. Finally, posts to the forum that have nothing to do with file sharing.


Now, for the problems people are having with uploading / downloading, Consider the following suggestions:


To maximize your ability to download successfully do the following things:

1. Go to tools/options/searching/Quality (show all four star results)

This will effectively filter out all of the people who are behind firewalls or have other connection issues, this will greatly reduce your frustration in downloading.

I should note however, that this could significantly reduce the amount of content you see, as most of the content being shared on the network is being shared from hosts which are poorly configured for sharing and you would probably have problems downloading from them anyway.


2. Go to tools/options/searching/speed (show all speeds)

I make this suggestion because if you are already filtering by Quality, filtering by speed will further reduce your results. If there 20 people on modem connections that have the content you want why not download from them.

3. Go to tools/options/filters/hosts under the disallow all messages from specific hosts add the following IPs: 192.168.*.* AND 10.*.*.*

I make this suggestion to filter out all the host who have incorrectly forwarded their private IP address on the network. These IP addresses are NOT routable and you will NOT be able to connect and download content from these hosts so ignore results from these guys. if

4. Go to tools/options/filters/keywords Filter out search results containing !!!

Most likely viruses or porn files emulating your search queries.


Now on to problems with uploading. If you are experiencing problems with people up loading from your computer the suggestions I made in and maximizing your ability to download see:( 1 through 4 above.) your machine could be one of these hosts.

I'll start with some general suggestions:

1. Make sure that you are not sharing from a work or school location as peer to peer traffic tends to be administratively prohibited. although it may not be explicitly blocked they could be applying quality of service rules to your traffic.

2. If you are sharing from home - leave your machine on for at least 4 hours (you can't expect people to download from you if you jump on the network do some searches and then disconnect.)

3. Finally, if you are using NAT (meaning that the IP address of your machine is 10.x.x.x or 192.x.x.x ) now, might be able to connect, search and download from the network but no one will be able to upload from you. If you have taken the advise of others to force your IP using limewire then your half way there, as your port forwarding is working correctly. But, you need to FORCE THE IP OF YOUR ROUTER or FIREWALL to the network. To find out what your ip is from the machine that you use to get on Gnutella open a web browser to Find My IP Address - Lookup
(write this IP down and force this IP in Limewire) If you need help testing this Just post a reply to this thread.

By implementing these suggestions you will have better luck downloading and uploading on Gnutella.

Friend Lee,I thank you for your advise Could you please explain what you say Force Thia IP in Limewire.I am not computer savvy (yet) and am lost by what you suggest..Thank You BB

birdy February 10th, 2008 07:41 PM

Hi BB,

There's no 'force IP' option in LW anymore, it's been replaced with the option to use UPnP or port forward.
Lee's post was written back in 2002 & so there have been heaps of changes since then:)

What's the problem...are you firewalled, can't connect or are you just wanting to optimise LW's performance?

If you have a firewall/conection issue, please post your system details for us.
System details - help us to help you -> Provide these details when you post!!!(click on link)

If you're just wanting the best performance out of LW, check out the thread below (the first few posts by murasame).
A few things to consider while configuring Limewire for optimal performance...

buff shagwell February 10th, 2008 10:45 PM

Quote:

Originally Posted by JoeElJefe (Post 307713)
Just updated to 4.16.6 I can't open LimeWire. It goes to LIMEWIRE SETUP WIZARD where you select Network Speed, System Setup & Content Filtering but then What??? If I close that popup, I go NO where? What am I doing wrong. THANKS...

Hey sorry for the delayed response. I've been out of town. So, did you get your LW figured out yet? I see on the next page that LeeWare and Birdy have addressed the some typical problems for you. Did you get a chance to read them yet? You said you just upgraded right? So, you've used LW before? Did you get it from the official Limewire site? Are you still in the set-up stage? Does your system have the main LW page up? In the lower left portion of the screen it should show your connection. Does your desk top show a LW icon? Right click on it and "run program". I'm just giving you some basic simple tasks. I'll need you to be a little more specific in order to trouble shoot the problem. The forum has a F&Q section as well. Plenty of info there. I'll be glad to help, just give me enough info. Let me know, and we'll get it running. :xeri_ok1ani:

belfastbill February 11th, 2008 07:34 AM

Thank You Very Much.You have given me lots to read But I want to learn so I will..BB

rohitkhariwal March 10th, 2008 10:16 PM

I have the public ip but still not a single upload. Some files got 100000 hits but not a single download.

What could be the problem?

kmrausch April 12th, 2008 10:39 AM

HOw do you force your ip address? I looked it up, now I would like you to explain what to do with it. Thank You

rohitkhariwal April 12th, 2008 04:03 PM

I have dedicated server with static IP

waiverrn April 13th, 2008 12:14 PM

limewire one time purchase?
 
I love limewire and been using for 3-4 years until past month or so would not connect. I uninstalled. I thought you just had to pay one time. I got scammed and paid SOMEONE $35. How can I get it again for free - it don't recognize my email address when I say already bought pro?? help

Remoc April 13th, 2008 12:39 PM

YOU Want LW Pro For Free, Because YOU were Scammed. :cheesy:


All times are GMT -7. The time now is 10:29 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 ©2011, Crawlability, Inc.

Copyright © 2020 Gnutella Forums.
All Rights Reserved.