Gnutella Forums  

Go Back   Gnutella Forums > Current Gnutella Client Forums > LimeWire+WireShare (Cross-platform) > LimeWire+WireShare Tips and Tricks
Register FAQ The Twelve Commandments Members List Calendar Arcade Find the Best VPN Search Today's Posts Mark Forums Read

LimeWire+WireShare Tips and Tricks Advanced users meet here to share secrets about pushing LimeWire to the limit.


Welcome To Gnutella Forums

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, fun aspects such as the image caption contest and play in the arcade, and access many other special features after your registration and email confirmation. Registration is fast, simple and absolutely free so please, join our community today! (click here) (Note: we use Yandex mail server so make sure yandex is not on your email filter or blocklist.)

If you have any problems with the Gnutella Forum registration process or your Gnutella Forum account login, please contact us (this is not for program use questions.) Your email address must be legitimate and verified before becoming a full member of the forums. Please be sure to disable any spam filters you may have for our website, so that email messages can reach you.
Note: Any other issue with registration, etc., send a Personal Message (PM) to one of the active Administrators: Lord of the Rings or Birdy.

Once registered but before posting, members MUST READ the FORUM RULES (click here) and members should include System details - help us to help you (click on blue link) in their posts if their problem relates to using the program. Whilst forum helpers are happy to help where they can, without these system details your post might be ignored. And wise to read How to create a New Thread

Thank you

If you are a Spammer click here.
This is not a business advertising forum, all member profiles with business advertising will be banned, all their posts removed. Spamming is illegal in many countries of the world. Guests and search engines cannot view member profiles.



           Deutsch?              Español?                  Français?                   Nederlands?
   Hilfe in Deutsch,   Ayuda en español,   Aide en français et LimeWire en françaisHulp in het Nederlands

Forum Rules

Support Forums

Before you post to one of the specific Client Help and Support Conferences in Gnutella Client Forums please look through other threads and Stickies that may answer your questions. Most problems are not new. The Search function is most useful. Also the red Stickies have answers to the most commonly asked questions. (over 90 percent).
If your problem is not resolved by a search of the forums, please take the next step and post in the appropriate forum. There are many members who will be glad to help.
If you are new to the world of file sharing please do not be shy! Everyone was ‘new’ when they first started.

When posting, please include details for:
Your Operating System ....... Your version of your Gnutella Client (* this is important for helping solve problems) ....... Your Internet connection (56K, Cable, DSL) ....... The exact error message, if one pops up
Any other relevant information that you think may help ....... Try to make your post descriptive, specific, and clear so members can quickly and efficiently help you. To aid helpers in solving download/upload problems, LimeWire and Frostwire users must specify whether they are downloading a torrent file or a file from the Gnutella network.
Members need to supply these details >>> System details - help us to help you (click on blue link)


Moderators

There are senior members on the forums who serve as Moderators. These volunteers keep the board organized and moving.
Moderators are authorized to: (in order of increasing severity)
Move posts to the correct forums. Many times, members post in the wrong forum. These off-topic posts may impede the normal operation of the forum.
Edit posts. Moderators will edit posts that are offensive or break any of the House Rules.
Delete posts. Posts that cannot be edited to comply with the House Rules will be deleted.
Restrict members. This is one of the last punishments before a member is banned. Restrictions may include placing all new posts in a moderation queue or temporarily banning the offender.
Ban members. The most severe punishment. Three or more moderators or administrators must agree to the ban for this action to occur. Banning is reserved for very severe offenses and members who, after many warnings, fail to comply with the House Rules. Banning is permanent. Bans cannot be removed by the moderators and probably won't be removed by the administration.


The Rules

1. Warez, copyright violation, or any other illegal activity may NOT be linked or expressed in any form. Topics discussing techniques for violating these laws and messages containing locations of web sites or other servers hosting illegal content will be silently removed. Multiple offenses will result in consequences. File names are not required to discuss your issues. If filenames are copyright then do not belong on these forums & will be edited out or post removed. Picture sample attachments in posts must not include copyright infringement.

2. Spamming and excessive advertising will not be tolerated. Commercial advertising is not allowed in any form, including using in signatures.

3. There will be no excessive use of profanity in any forum.

4. There will be no racial, ethnic, or gender based insults, or any other personal attacks.

5. Pictures may be attached to posts and signatures if they are not sexually explicit or offensive. Picture sample attachments in posts must not include copyright infringement.

6. Remember to post in the correct forum. Take your time to look at other threads and see where your post will go. If your post is placed in the wrong forum it will be moved by a moderator. There are specific Gnutella Client sections for LimeWire, Phex, FrostWire, BearShare, Gnucleus, Morpheus, and many more. Please choose the correct section for your problem.

7. If you see a post in the wrong forum or in violation of the House Rules, please contact a moderator via Private Message or the "Report this post to a moderator" link at the bottom of every post. Please do not respond directly to the member - a moderator will do what is required.

8. Any impersonation of a forum member in any mode of communication is strictly prohibited and will result in banning.

9. Multiple copies of the same post will not be tolerated. Post your question, comment, or complaint only once. There is no need to express yourself more than once. Duplicate posts will be deleted with little or no warning. Keep in mind a forum censor may temporarily automatically hold up your post, if you do not see your post, do not post again, it will be dealt with by a moderator within a reasonable time. Authors of multiple copies of same post may be dealt with by moderators within their discrete judgment at the time which may result in warning or infraction points, depending on severity as adjudged by the moderators online.

10. Posts should have descriptive topics. Vague titles such as "Help!", "Why?", and the like may not get enough attention to the contents.

11. Do not divulge anyone's personal information in the forum, not even your own. This includes e-mail addresses, IP addresses, age, house address, and any other distinguishing information. Don´t use eMail addresses in your nick. Reiterating, do not post your email address in posts. This is for your own protection.

12. Signatures may be used as long as they are not offensive or sexually explicit or used for commercial advertising. Commercial weblinks cannot be used under any circumstances and will result in an immediate ban.

13. Dual accounts are not allowed. Cannot explain this more simply. Attempts to set up dual accounts will most likely result in a banning of all forum accounts.

14. Video links may only be posted after you have a tally of two forum posts. Video link posting with less than a 2 post tally are considered as spam. Video link posting with less than a 2 post tally are considered as spam.

15. Failure to show that you have read the forum rules may result in forum rules breach infraction points or warnings awarded against you which may later total up to an automatic temporary or permanent ban. Supplying system details is a prerequisite in most cases, particularly with connection or installation issues.

Violation of any of these rules will bring consequences, determined on a case-by-case basis.


Thank You! Thanks for taking the time to read these forum guidelines. We hope your visit is helpful and mutually beneficial to the entire community.


Like Tree7Likes

Reply
 
LinkBack Thread Tools Display Modes
  #31 (permalink)  
Old July 2nd, 2012
Lord of the Rings's Avatar
ContraBanned
 
Join Date: June 30th, 2004
Location: Middle of the ocean apparently (middle earth)
Posts: 616
Lord of the Rings has a distinguished reputationLord of the Rings has a distinguished reputationLord of the Rings has a distinguished reputation
Default

If you are looking for the Security Updaters, see post #38 (can click link) further below. Or use these links: LimeWire Security Updater installers via MediaFire, OR via Sabercat


Not all the Japanese peers are good peers, but that's true for a number of countries I guess. In my connection lists I've posted for people having connection problems, I removed most Japanese hosts, only a few 'if any' left on the list from memory.

I've done the same thing as you at times, continually removed such hosts. If you desperately wanted to get rid of Japanese hosts full stop, you could ban all their ranges. lol I've tried that too.

Just as a note, I find Phex tends to get a nice mix of European and USA hosts. Not sure why LW attracts them, both LW 4 & 5, perhaps because it IS LW. But LW was designed to give some preference to connecting to LW and LW clones (such as Cabos), also for search results. This is a common trait for most gnutella clients to be set to favor their own kind when they can. My Phex just connected to 3 French, 1 UK and 1 USA, then later a 6th ultrapeer.

Here's a funny episode. Whilst using BearShare, I accidentally replaced my hostiles with the original and ... these hosts, each time I removed them they were replaced with more of same ip address or similar, example 3 snaps joined here (all same port, all same shares): snapshots joined. These are in fact what I refer to as Download-BOTs; they attempt to fill all your upload slots. Their program ID's are fake & not what they advertise themselves to be. The security Hostiles file(s) blocks these BOTs (edit: WireShare blocks them by default internally.)

If you have a firewall that can ban ports such as Windows 7 firewall, I guess you could set up a disallow rule for port 6346 but this might also mean the possibility of missing out on some good hosts who are using port 6346 as a static port and not necessarily using Cabos or similar. But I would recommend banning ports 27016 and 7001 for both tcp and udp if you can, only LW spammers use that port. More on spam or bad addresses here http://www.gnutellaforums.com/open-d...tml#post368141. Note: the technutopia hostiles document itself is not read by any version of LW 5 due to its older address format layout.

If you want a full list of Japanese ip's I can send you one privately. Or else send you the list I use for blocking many of them. The majority of Japanese ip addresses below the 200.x.x.x range are static and do not change.

Edit: Port Block instructions
I have included some instructions on how to block port 27016 in your firewall (you should also block port 7001.) This example applies to Windows 7 firewall but most 3rd party firewalls will probably have a similar option. (Note: whilst LW 5 might connect to many spammers using port 27016, both LW 4 and FrostWire are total magnets for them.)

For Windows 7 and 8, go to Control Panel, open up Windows Firewall. Click on the Advanced Settings option. Once the Advanced Settings is open, look to the left-side and click on Inbound Rules.
Now, shift your eyes to the right-side of the firewall window and look for the Actions section for Inbound Rules and click on New Rule underneath it.
In the window that appears you will have 4 options for type of rule to add, choose Custom. Then click Next button.
You can either specify All Programs or simply one here. Then click Next button.
Protocol Type drop down menu: select TCP first (later do another identical rule for UDP.) Leave Local port set to All Ports. Then select Specific Ports option for Remote port and type in port 27016 into the port number box. Then click Next.
Set Scope to Any ip address (leave it as it is.) Then click Next.
The next window gives action choice. Check the option to Block the connection. Then cilck Next button.
Check all the options for Domain, Private and Public, then click Next button. This is the final window giving you the choice to name and describe the new rule. Description is optional. Name it something that represents the new rule. I named mine Port Block 27016 TCP then click Finish. I would recommend you do a new equivalent rule also for UDP. It is possible to duplicate a rule, double-click it and then simply change the protocol from TCP to UDP and rename it appropriately.

Port 27016 is not officially used for anything you would ever use it for. Port 27016 spammer hosts tend to use proxy switchers so there is little point in banning their ip's for longer than a week. Port 7001 is used by upload-slot container hostile hosts which not too many people know about, example image snapshots of upload attacks here and here.

How to Force UltraPeer (Better searches whether using Pro or Basic)-win7-firewall-add-port-block.gif (Click sample image to see larger view, click again to see in its own window unless you have pop-up blocker.)
* Sorry, last year I accidentally gave incorrect instructions for this. This is the correct way to block ports for Windows 7+8.

How to Force UltraPeer (Better searches whether using Pro or Basic)-win7-firewall-add-port-blockc.gif * This similar example might even be slightly better.



A Gnutella ip Group Block in Windows 7 or 8 Firewall
Windows 7's firewall has the option for doing a group block. I created one for TCP and UDP. In fact, you only need to do one then duplicate it and change the rule's protocol from TCP to UDP then rename it or alternatively a single rule and set the protocol to All. Sounds easy? Set up a new inbound rule, and set it to Custom in the window that appears. Choose either all programs or LimeWire/FrostWire, etc. path (my sample shows all programs but you can choose a specific program), then all ports. Then start adding the host addresses you wish to add. Then when finished, name the rule. I have created a sample image but note, the sample GiF is a little large in size and has quite a few frames. The advantage of a group block is you could disable it if or when necessary, or simply set it to only apply for LimeWire/FrostWire, etc. in the program/path option. For a good reference for hosts to block in a firewall see http://www.gnutellaforums.com/open-d...tml#post368141.
Why would you block these ip's in your firewall? To reduce very high pings directly aimed at your program (such as LW), so the firewall handles it instead. This will mean less lag building up in LW over a period of time. It will also mean less chance of LW being affected by the pinging and drop its performance as a result.

How to Force UltraPeer (Better searches whether using Pro or Basic)-win-7-firewall-group-ip-blockb.gif (sample GiF image 250 KB, click to see in large view) How to Force UltraPeer (Better searches whether using Pro or Basic)-win-7-firewall-group-ip-block-c.gif * (this sample only needs a single rule by using the 'Any' protocol and applied specifically to the program to be used for.)

How to add an ip group block list to Kaspersky Firewall:
Firewall -> Settings -> Network Packets -> select 'Addresses from Group' and click Add -> click Add to add an ip address and continue doing this. After adding all the addresses, name the rule something like 'ip address block list' & click OK. Make sure that rule is still selected in the Network Packets section and select 'Block' at top and 'Any Network Activity' in the middle section. Though you can select the Block option after selecting addresses from group option near beginning of the process.
Later versions of Kaspersky Firewall might look a little different but the process will most likely be the same or similar.

Kaspersky Firewall sample image (click to see sample image)


Outgoing rules?
Why set up outgoing rules to block certain ip ranges instead of only incoming rule blocks? Because if you are sharing files, your program sends your shared files details that correspond to a particular search. Do hostile clients search? Since some hostile clients are known to browse hosts, then chances are they also do searches. Hosts with port - 7001 are known as upload-slot containers, they will download everything you have, they get paid to do this to prevent you sharing to anybody else. Having equivalent outgoing rules may help to slightly reduce some incoming traffic from bad hosts. (I also strongly suspect 'they' have BOTs that search the network and every client they can find.)

Replicating incoming block rules for outgoing rules has an effect of keeping you partially invisible to hostile hosts. This also applies to the ports 27016 and 7001 block rules. I have found the outgoing rule for port 27016 UDP ping count now out-numbers the incoming. And some other blocks now count as zero incoming but high numbers outgoing. This suggests your shares details have been blocked from being sent to 'them' if you also choose to use firewall outgoing block rules. This also helps with reduced spam results, overall better performance without receiving as many pings from the hostile hosts. There was a very noticeable increase in search results (two to three times more than average in initial testing.) If running as an ultrapeer, then leafs in search mode.should arguably be receiving less results from bad hosts via searches that touch your client in any way.
sleepybear91 likes this.

Last edited by Lord of the Rings; February 15th, 2013 at 05:08 AM. Reason: Re-did my Windows 7 port block sample, since my original was incorrect. Added: Outgoing firewall rules a major plus !!!
Reply With Quote
  #32 (permalink)  
Old July 12th, 2012
Novicius
 
Join Date: July 12th, 2007
Posts: 3
OLDCODER is flying high
Default

So, is it possible to restrict searches to just one county, say the U.S.? Or, is it possible to find ultrapeers that are close by and restrict searches to just them?
Reply With Quote
  #33 (permalink)  
Old July 12th, 2012
Lord of the Rings's Avatar
ContraBanned
 
Join Date: June 30th, 2004
Location: Middle of the ocean apparently (middle earth)
Posts: 616
Lord of the Rings has a distinguished reputationLord of the Rings has a distinguished reputationLord of the Rings has a distinguished reputation
Default

Quote:
Originally Posted by OLDCODER View Post
So, is it possible to restrict searches to just one county, say the U.S.? Or, is it possible to find ultrapeers that are close by and restrict searches to just them?
Not as far as I know. And I'm not sure the OOB (out of bounds) search option plays a part here for such searches.
There was a LimeWire Beta version, one of the 5.5/5.6 prototypes called Geo-Restrict which I believe was supposed to have the purpose you are asking.
http://www.gnutellaforums.com/gettin...-5-5-16-a.html, ie: released on May 4, 2010.

The only prototypes version I've tried in recent times was the Light version which was designed to use less computer resources than standard LW.
Reply With Quote
  #34 (permalink)  
Old July 29th, 2012
sleepybear91's Avatar
Gnutella Veteran
 
Join Date: October 30th, 2010
Location: Peak Top
Posts: 123
sleepybear91 is flying high
Default

Quote:
Originally Posted by Lord of the Rings View Post
Not all the Japanese peers are good peers, but that's true for a number of countries I guess. In my connection lists I've posted for people having connection problems, I removed most Japanese hosts, only a few 'if any' left on the list from memory.

I've done the same thing as you at times, continually removed such hosts. If you desperately wanted to get rid of Japanese hosts full stop, you could ban all their ranges. lol I've tried that too.

Just as a note, I find Phex tends to get a nice mix of European and USA hosts. Not sure why LW attracts them, both LW 4 & 5, perhaps because it IS LW. But LW was designed to give some preference to connecting to LW and LW clones (such as Cabos), also for search results. This is a common trait for most gnutella clients to be set to favor their own kind when they can. My Phex just connected to 3 French, 1 UK and 1 USA, then later a 6th ultrapeer.

If you have a firewall that can ban ports such as Windows 7 firewall, I guess you could set up a disallow rule for port 6346 but this might also mean the possibility of missing out on some good hosts who are using port 6346 as a static port and not necessarily using Cabos or similar. But I would recommend banning port 27016 for both tcp and udp if you can, only LW spammers use that port. More on spam or bad addresses here http://www.gnutellaforums.com/open-d...tml#post368141. Note: the technutopia hostiles document itself is not read by any version of LW 5 due to its older address format layout.

If you want a full list of Japanese ip's I can send you one privately. Or else send you the list I use for blocking many of them. The majority of Japanese ip addresses below the 200.x.x.x range are static and do not change.
First of all Thank you very much LOTR! Secondly I PM'd you right after this post and then again today. Then when I go into my PM "SENT" box it shows "zero" It apparently it is not sending out any of my PM's. Yes I would sure like a list you use for blocking many of them. And who should I inform about the PM glitch?
Reply With Quote
  #35 (permalink)  
Old July 29th, 2012
Lord of the Rings's Avatar
ContraBanned
 
Join Date: June 30th, 2004
Location: Middle of the ocean apparently (middle earth)
Posts: 616
Lord of the Rings has a distinguished reputationLord of the Rings has a distinguished reputationLord of the Rings has a distinguished reputation
Default

Quote:
Originally Posted by sleepybear91 View Post
... Then when I go into my PM "SENT" box it shows "zero" It apparently it is not sending out any of my PM's. Yes I would sure like a list you use for blocking many of them. ...
You need to check the option to save a copy when sending a PM. Otherwise the default is not to save a copy. I will investigate but don't think this default PM behaviour can be changed.

I have been tossing a coin so to speak for a considerable time as to whether I should offer a copy of the ban list publicly or not. I've decided I will. A copy is attached below. This is a combination Japanese and Taiwanese list. Introduction then shows a list of the addresses arranged on separate lines. A 2nd list in middle of the document is the complete list, just in case you wanted to use more than I provided in the shorter list and use ranges of /19 or higher for the smaller sub-ranges. A 3rd list is provided at bottom of document describing how to add them to LimeWire. This 3rd list lists them horizontally exactly how LimeWire lists them. I hope that does not sound confusing.

The full list has 2,139 listings, the shorter one uses 873. The smaller list will block out the majority (probably over 98%), perhaps the odd one will slip through. (The full list excluded partial ranges that were smaller than a total of 256 addresses. The shorter list excluded ranges of 8,192 addresses or smaller.)

(Remember this list is only a country block, not a spam host block list. But it will have a similar effect since a significant percentage of spammers and bad clients do come from the two countries in question. And for those whom have been asking, it will enable you to get search results more regionally.)

If you find it confusing, just ask.

Scroll to bottom of the document and copy all the addresses listed after the BLACK_LISTED_IP_ADDRESSES=

Then paste them into the equivalent location in the limewire.props file. Or at the end of any banned address listings already there would be best. Make sure there's no spaces or carriage-returns before the numbers after you paste them in.
You might not see the .props extension on the file in the LW preferences folder. But if you get the file's properties, it will say it's a props file.

Edit: Just discovered if you have never previously banned hosts then the black listed ip address section will not show in the props file. Though I imagine most people have banned hosts. I've amended the instructions just in case of that scenario. ie: in that scenario, copy the Black_listed_ip_addresses= as well as the numbers as an entire paragraph into a new line at the end of the props file.

I've edited the file several times after some errors and some LW fussyness, I think it should be as good as it can now. Apologies. uh, maybe I should quit.

Edit: I have provided an installer to do it all for you for MacOSX users. ie: simply run the installer once and it will place the block list exactly where it needs to be whether you have a previous ban list or not. The installer is only for MacOSX users. Warning: do not run the installer more than once, it's a large list so you do not want double that. The applescript does it all in 1 or 2 seconds or less, takes fraction of a second on my computer (when you see the Quit menu, it has finished.) If you have a previous ban list then this list will be inserted at the beginning. If you have no ban list, the installer will insert one at end of the props file. LimeWire must be closed before you run this installer.

Edit: installer no longer needed, so has been removed.
The list updated to correct a few minor items of formatting and removed instructions for adding to LW. Re-attached in case anybody wishes to use for firewall blocking. For other purposes, the security list should be used instead. Firewall listing will reduce pings directly on LW and thus less chance of lagginess after multiple day long sessions.

(Attachment removed, needs updating anyway as the ipv4 addresses had not yet finalised in 2012.)
sleepybear91 likes this.

Last edited by Lord of the Rings; November 14th, 2012 at 07:23 PM. Reason: Removed OSX installer. Re-attached list in small chance someone might wish it for their firewall. Updated list.
Reply With Quote
  #36 (permalink)  
Old July 30th, 2012
Lord of the Rings's Avatar
ContraBanned
 
Join Date: June 30th, 2004
Location: Middle of the ocean apparently (middle earth)
Posts: 616
Lord of the Rings has a distinguished reputationLord of the Rings has a distinguished reputationLord of the Rings has a distinguished reputation
Red face

Oops I accidentally left 3 large ranges off the list yesterday, I've replaced the list. Sorry about that, because I know a few people downloaded it.

In my experience, LW 5 does not appear to be able to read a range x.x.x.x/11 or larger to /1.
Thus I needed to split those ranges up into /12 blocks which represents x.0.0.0.0 . to . x.15.255.255 for example.
I accidentally left 3 of those out of the shortened list since the longer list had /8 and I removed those when I reduced the list. Anyway, it's fixed.

Edit again, I fixed up a few other small errors. duh, sloppy work. I redid the list instead of using the one I had which is where errors crept in. I've amended it about 3-4 times now. I should have simply grabbed the ones from my firewall since they were all correctly done. And sorry again, I've been cursing myself for my errors. We all make mistakes.

Remember if you are copying this list to the end of any existing ban list, the last address of your existing list will need a semi-colon ; before you copy these to the end of that list. All addresses should be separated by a semi-colon with exception of the very last one on the list.

If you wanted to extend the filter further if too many hosts are getting through, then add the addresses with /19 at the end. That would take the total of listings up to 1,095. Or even also the /20. This is one reason I supplied the full list to refer to just in case.

For anybody who is wondering: /32 = 1 single ip address. /31 = 2 sequential addresses. /30 = 4 sequential addresses. etc. As you notice the range keeps doubling. Continuing to /24 =256 addresses, /23 = 512 addresses, etc.

I've confirmed BearShare 5 cannot read this ip addressing format. BS instead uses an older sub-net masking format.


Edit:
BTW if you installed/pasted my earlier postings of the blocklist, then you can remove them. Open the Japan & Taiwan block list file and choose the first host address listed near top of page, select and copy it. Then open the Limewire.props file, open the search function and paste the host address you copied into the search box. Then search. Then select that found first address and whilst holding the SHIFT key select to the last of them and delete/cut/remove. The first address will be 1.0.64.0/18 and the last address will be 223.223.0.0/17. The numbers are all in numerical order so should be easy to find the last one.

You can then replace that with the newer list.

I have an upcoming Shortened 'Hostiles' list from the BearShare Full-size Hostiles blocklist I will post soon. I am trying to make sure there is no needing to repost with this next block list, unless it is an updated version. As you might expect though, the Hostiles list is quite large. Even though it's a fraction of the half-million listings of the original. But I have tested the hostiles list with the additional Japan+Taiwan list also added and so far no memory issues, surprisingly. I will leave it running to see how it goes over an extended period.

My newer note for the Hostiles list will explain the two main areas that cause memory problems with LW 5 / LPE. And what to reduce if you do have LW memory problems. Reducing your hair, a haircut is always good even if it does not help LW.

Last edited by Lord of the Rings; August 10th, 2012 at 02:27 PM. Reason: Edited to give up to date details
Reply With Quote
  #37 (permalink)  
Old September 18th, 2012
Lord of the Rings's Avatar
ContraBanned
 
Join Date: June 30th, 2004
Location: Middle of the ocean apparently (middle earth)
Posts: 616
Lord of the Rings has a distinguished reputationLord of the Rings has a distinguished reputationLord of the Rings has a distinguished reputation
Default

I quite easily connect as an ultrapeer. If I don't, I find that if I close LW and restart this can often help invigorate LW into becoming an ultrapeer. That's for LPE at least. Not sure this approach is so great though since UP's are supposed to be users whom are in a way rewarded for their long times online. Sure I spend 1-4 sequential days online. But, LPE seems to be able to be kicked into UP sometimes. If I restarted LW after a long session and it starts to connect as a leaf, if I remove the UP's as it's connecting it can also kick LW into UP mode.

But I will confirm Sleepless's advice on page 1 of this thread still works for LimeWire 5. After an hour as a Leaf drop the first or second connections. Sometimes I may need to drop them all and this then pushes me into Ultrapeer mode (U.P.) And in my own experience, I seem to get much better search results and less spam when running as an ultrapeer. For example, when as a U.P. over the past two years I tend to get 50-60 results (and if it's 90-110 then I know I'm with good connections) for a particular search term I often use. When as a Leaf I might only get 20-30 results for same search.

The way LW is designed, normally connecting as an ultrapeer can depend on average time online (and not being firewalled of course.) I noticed this in the LW mediawiki.
Reply With Quote
  #38 (permalink)  
Old November 3rd, 2012
Lord of the Rings's Avatar
ContraBanned
 
Join Date: June 30th, 2004
Location: Middle of the ocean apparently (middle earth)
Posts: 616
Lord of the Rings has a distinguished reputationLord of the Rings has a distinguished reputationLord of the Rings has a distinguished reputation
Default Security packages for LimeWire (help block out the spam and evil hosts)

Edit: Since September 2015, there has been considerable removals of blocked ranges from the list. These listings appear to be redundant. Probably over 90% of the original listings were put in place prior to 2011 (or prior to 2010.) Obviously this needed to be reviewed. Since then, many internet service providers have changed owners; purposes for some ranges has changed; whilst last decade most ip addressing was static, nowadays the opposite is true, mostly dynamic; some companies set up for attacking the network no longer exist. But at the same time, some new companies have been found in recent years.

There is now a combo WireShare-LimeWire Hostiles-Updater. The WireShare hostiles included within the program installer is from July 2015. The older WireShare versions' hostiles even older.

(Original text from 2012): It has been a few months since I suggested I would do it. But I have finally created a blocklist (security list) based off the original BearShare Full Hostiles but continually updated over past few months. I realised the props file is a terrible place for a large amount of data to be stored because LW copies that information into memory and totally rewrites the data back to the props file every 5-10 minutes.
(obsolete): Based on my work on the MacOSX Portable Mac, I had an inkling of an idea I might be able to force LW to read a settings option from a separate file. And it works! I recently packaged all the LW 4 and 5 installers with the security installers. These installers included with the LW installers include a base LW.props (settings) file which includes the directive path for LW to find and use the security file. (/obsolete)

Nobody is pretending these files will block out all spam but definitely reduce it very significantly.

I use the CIDR host format which is more memory friendly than the older netmask format BearShare uses (50-55% less memory.) Also my large (Strong) lists are notably smaller than the BearShare list but does not take any strength away. (My list is also smaller than the FW list which uses the old BS netmask format.)
A comparison of characters needed in memory between the LW CIDR blocklist and the BearShare Full Hostiles:
LW-NJ (441,000 hosts) = 6,609,430
BearShare Hostiles-NJ (477,000 hosts) = 14,042,472
LW full (418,000 hosts) = 6,259,398
BearShare Hostiles Full (453,000 hosts) = 13,320,053
LW-Light NJ (31,000 hosts) = 473,592
LW-Light (30,000 hosts) = 458,626

The security lists have been tested with LW 4.14 to 4.18 and LW 5 (Pirate Edition.) I presume the security lists will also work with earlier versions of LW 4.

LW 4 and 5 seem to be able to handle the large security list fine, though for those with very large shares and whom have long sessions (several days) may find LW 5 becomes a little laggy after 2-3 days. There should be no problems using the large list in general. But if you do, swap to one of the light lists. The large list is about 14 times larger (I refer to the large list as Strong Security.) I will be updating the Security files every 4 to 6 months. (- edit). I will date them so you know.
With 6 lists to update (two for BearShare), it's a lot of work. Incredibly slow, tedious and boring.
I will not be adding spam hosts to the list unless they are sighted again after a month (but will keep a permanent record of them.) Some spammers use proxy switchers, and some other spammers use dynamic addresses. This bothers me about inheriting a previous list because I have no idea of the prior methodology used. Edit: If there had been enough interest shown I might have started from 'almost' scratch but seems not many persons have shown interest in this security concept.

Not a bad idea to clear out any banned lists of spammers you have done after a week or month. Chances you will never see most of them again using the same host address after a day or a week. Clearing the list out will save on memory use.

The 'Full' Japanese block versions are really 'full' blocks. There's only a very minor chance you might see any Japanese hosts. Yes you may see Cabos hosts but they will not be from Japan. Unlike my partial Japanese blocks I did a few months ago. If you used those previous Japanese block lists from 3 months ago you should remove them from your props file Banned list to save some memory.

* I would recommend removing most if not all of your previously banned hosts to save memory. Using the Security list you will probably find any hosts you banned previously are no longer needed. You can still add fresh ones by the usual method of banning if any hosts are spammers or are problematic.

(obsolete): Once your limewire.props file has the directive instructions for LW to find the location of the security file, after that in future all you need to do is install updates to the security file itself. Unless of course you delete your LW preferences folder for any reason or your LW props file becomes zeroed after a severe crash. (/obsolete)

WireShare or LimeWire will not read or re-read a fresh hostiles file until after the program's next restart. So it's best to install the hostiles-update whilst the program is closed.

The options:

1. 'Light' Security
Choice for keeping things light. The main known static spam companies are blocked. Though you might still receive spam from dynamic/proxy spammers.
Filename: LimeWire Light Security-NJ 2012 Windows Updater

2. 'Light' Security with 'Full' Japanese blocks for those whom only wish to connect to and search for similar cultural content. This will also remove any chance of spam from Japanese hosts.
Filename: LimeWire Light Security 2012 Windows Updater

3. 'Strong' Security
This will maximize blocks against spammers. Not to say you will not still get spam, but will greatly reduce it significantly.
Filename: LimeWire Strong Security-NJ 2012 Windows Updater

4. 'Strong' Security with 'Full' Japanese blocks for those whom only wish to connect to and search for similar cultural content. This will also remove any chance of spam from Japanese hosts. This is the strongest of all the packages and is 6% smaller than the other Strong security package due to not needing to block individual or small ranges of known Japanese spam/hostile hosts.
Filename: LimeWire Strong Security 2012 Windows Updater

* In case you are wondering, the initials -NJ represent No Japanese blocks. Though really means just basic blocks against known static Japanese spammers and business ranges. But you will still be able to download and share with regular Japanese hosts.



Windows users: (as of Feb 2013 only one installer): The installer gives the above 4 options. As of 31 April 2013, the updater will no longer replace your props file if first time installing. Instead the necessary instruction is inserted into the props file by the installer.

(obsolete): If you would prefer to do it manually, then uncheck first option in the installer or download the separate zipped Linux security file of choice. Open your limewire.props file in your LW preferences folder and create a fresh line and type in the following:
PATH_TO_BLACK_LISTED_IP_ADDRESSES=Home>AppData/LimeWire/Hostiles.txt
Save the file as standard text, keeping the .props file extension. This line is necessary for LW to find the security file. If you simply install the security file and LW's props have no instructions on finding it then LW will not use the security file. (/obsolete)


MacOSX users: all 4 packages are included within the one installer. Choose from the installer's menu options. The installer script will insert a line of text into your props file which will tell LW where to find the security file. This makes it very very easy for you. Filename: MacOSX LimeWire Security 2013 install-Updater

Linux users: download the Linux security file of choice, unzip and place into your LW preferences folder found at: ~/.limewire
Edit 8 June 2013, I have now included a .sh bash script for installing, all inclusive in one package. I used 7z format as it compresses to 1.3 MB compared to zip or tar.gz at 3.4 MB. Uncompress, open the folder and simply run the script via terminal and your choices will show. Line inserted into the props file for you. The manual method below is then not necessary. (I used bash v.4 syntax for suppressing i/o error messages, let me know if this causes problems for anyone using an earlier bash version. bash v.4 was released in 2009.)
(obsolete): Locate and open your limewire.props file found at ~/.limewire/limewire.props and type into a fresh line the following text:
PATH_TO_BLACK_LISTED_IP_ADDRESSES=Home/.limewire/hostiles.txt
Save the file as standard text, keeping the .props file extension. (/obsolete)


* Edit 14 May 2013: I just discovered on Linux the hostiles file needs to start without a capital or else it will not work. I have adjusted the files for linux. Sorry to anybody who might have been inconvenienced and thought these files did not work.

The Linux files include manual instructions for both Linux, Windows and MacOSX.

Linux Filenames: . linux_LW_Security_install.7z (recommended) - uses a script to install it.
(Edit: the Manual lists are no longer being hosted! Not enough demand for them.)
. Linux Manual Light LW Security 2013, . Linux Manual Light LW Security-NJ 2013, . Linux Manual Strong LW Security 2013, . Linux Manual Strong LW Security-NJ 2013.


LimeWire clones are unable to utilize the hostiles file. I did create a multi-clone blocklist installer but discovered most LW clones did not use the hostiles. I find LuckyWire highly problematic to connect and only seem to be able to connect via forcing hosts. It's my guess it probably only works with LuckyWire and certainly seems to. The reason being most of the clones were earlier breakaways from the LW code before LW introduced the portable code options within the main code.


What is a Hostile Host? - my definition:
Nobody is pretending these lists will block out all spam but certainly greatly reduce it, and even better it will reduce chances of you connecting directly to known spam/hostile hosts. There's different types of spammers and hostile hosts. Some you may not be aware of due to their approaches. For example, some will ping your client to reduce your program's abilities at downloading, uploading, searching and even connections without attempting to connect, browse, or download from you. At worst the constant ping attacks (DDoS) will make you lose internet connection. Some will browse you as soon as and every time you log into the network. Then some may browse you robotically every 10-15 minutes for hours on end without downloading from you. Then there's some whom will attempt to fill and constrain your upload slots. This is a well known approach of theirs for many years. They will normally either choose your largest files to download all at once or your largest collection of files. -> These are all what I would refer to as hostiles. Spammers are 'almost' another category. And this is what the Hostiles list is about. Such recently identified hostiles are listed on the security lists to block them out. By recent I mean over the past 18 months because I only took upon this project this year and whilst aware of hostiles from the previous couple of years, I do not know the full history of the block list I inherited from the BearShare blocklist which had not been updated since June or earlier 2011.

Download links for the LimeWire Security Updaters: (choose appropriate version for your system and your choice of security from the folders. Feel free to Bookmark any of these links to periodically check for updates):

* LimeWire Security Updater installers via MediaFire *

* LimeWire Security Updater installers via Sabercat *

(Note: you need to use an up-to-date browser to use MediaFire. Pre-2013 Safari versions struggle to load their pages.)

One other piece of spam and hostile host advice is, if you have any firewall or security software that can block ports, set up a rule to block ports 27016 and 7001 for both UDP and TCP which is only used by spam companies. Windows 7 instructions bottom half of post #31 here.

If anything confuses you or you have any other questions, please feel free to ask. Also, if you find any problems with the installers or the way the security packages work, please let me know as soon as possible. As mentioned at beginning of the post, these have been tested on both Windows and MacOSX with LW 4 and 5. Edit: And Linux, but the hostiles filename & props reference must not use a capital letter on Linux systems. The MediaFire link has 2 options for Linux users, .tar.gz compressed file which is about 3.4 MB or a .7z compressed file which is about 1.3 MB in size.
Another note, these blocklists might conflict with using torrents.

Edit 18 September 2013, removed a character from each of the Full & Light Japanese block lists which prevented a range from working. Not sure how the odd character (looked like the letter a with a mark above it) became inserted, but it has since been removed.
yokku likes this.

Last edited by Lord of the Rings; March 14th, 2013 at 09:54 AM. Reason: Updated notes. Windows now only one installer. Clone update
Reply With Quote
  #39 (permalink)  
Old December 8th, 2012
Novicius
 
Join Date: December 8th, 2012
Posts: 1
yokku is a great assister to others; your light through the dark tunnel
Default

ありがとうございました。
Reply With Quote
  #40 (permalink)  
Old December 8th, 2012
Lord of the Rings's Avatar
ContraBanned
 
Join Date: June 30th, 2004
Location: Middle of the ocean apparently (middle earth)
Posts: 616
Lord of the Rings has a distinguished reputationLord of the Rings has a distinguished reputationLord of the Rings has a distinguished reputation
Default

Your welcome. Thank you for letting us know you found it helpful.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


LinkBacks (?)
LinkBack to this Thread: https://www.gnutellaforums.com/limewire-wireshare-tips-tricks/81811-how-force-ultrapeer-better-searches-whether-using-pro-basic.html
Posted By For Type Date
FTC responds to LabMD’s motion for sanctions in FTC v. LabMD » PHIprivacy.net This thread Refback August 31st, 2014 12:25 PM
Site Gnutella Forums | www.gnutellaforums.com | BoardReader This thread Refback July 1st, 2011 12:02 PM
Ultrapeer | Life123 This thread Refback March 19th, 2011 01:27 PM
Thread How to Force UltraPeer (Better searches whether using Pro or Basic) | Gnutella Forums | BoardReader This thread Refback February 18th, 2011 09:40 PM


All times are GMT -7. The time now is 09:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 ©2011, Crawlability, Inc.

Copyright © 2020 Gnutella Forums.
All Rights Reserved.